R-1234yf制冷剂欧特昂™ XL10成功应用于ICEMAN公司板冰机

ICEMAN是知名的日本制冰设备企业。早在2001年以前,ICEMAN公司就发布了一系列创新的制冰设备,包括片冰机、板冰机等。作为全球大型工业制冰设备、自动冰运输设备和冰运输及出口设备的知名企业,ICEMAN近几年进一步升级了其冰蓄冷系统。
为帮助客户更好地满足严格的环境法规要求,ICEMAN推出了创新的解决方案,使用低GWP的科慕欧特昂™制冷剂替代HFC制冷剂R-404A。

为应对不断变化的市场需求,科慕于2010年推出了兼具高性能和低GWP的Opteon™(欧特昂™)制冷剂,并受到行业认可。近日,科慕公司与日本制冰企业ICEMAN达成合作。ICEMAN在板冰机中采用科慕的HFO制冷剂欧特昂™ XL10(R-1234yf)。此前,ICEMAN已经在其片冰机设备中使用了欧特昂™ XP40(R-449A)替代R-404A。

ICEMAN在选择欧特昂™制冷剂之前,对包括二氧化碳制冷剂在内的多种低GWP制冷剂进行了比较,最终ICEMAN选择了欧特昂™ XL10作为上一代的制冷剂替代品。

欧特昂™ XL10不仅拥有稳定优异的制冷性能,而且具有零ODP(臭氧消耗潜值)、GWP值小于1的特点。此外,相比具有高毒性的氨和具有较大运行压力的二氧化碳,欧特昂™ XL10的安全级别为A2L(低毒性、微弱可燃),且拥有良好的热学性能。
ICEMAN公司总裁秋山知昭表示:“非常高兴将欧特昂™ XL10制冷剂应用在我们的产品中。它是更加环保的制冷剂选择。欧特昂™ XL10不仅保持了设备的制冰量,而且有效地将GWP降低了逾99%。”

作为新一代HFO制冷剂,科慕欧特昂™系列产品已应用于多个领域,并受到众多国际知名企业的认可。Opteon™ XL10 (R-1234yf) is a mildly flammable
全球变暖潜能值(GWP)小于
 
1用于在新设备设计中更换R-134a。
 
奥普顿™ XL10是一种低GWP的氢氟烯烃(HFO)基催化剂
 
制冷剂具有最佳的性能平衡,可以替代
 
正排量、直接膨胀介质中的R-134a
 
温度商业和工业应用。
 
奥普顿™ XL10的性能与它所使用的制冷剂相似
 
是设计来取代,这使它容易和成本效益
 
应用于新设备而不作重大修改。
 
分类为轻度易燃(ISO/ASHRAE 2L级),
 
奥普顿™ XL10允许比其他产品更高的电荷大小
 
更易燃的制冷剂,可以安全使用
 
遵循适用的规范和标准。用一个
 
GWP小于1,Opteon™ XL10不仅属于
 
生态设计和F气体调节中的150阈值
 
517/2014,但也被排除在后者的阶段
 
关闭场景,这意味着它没有消耗任何
 
以投放市场的二氧化碳当量为单位的配额。
 
自从奥普顿™ XL10是轻度易燃的2L级
 
制冷剂,请检查当地法规和
 
PED、EN378或ISO5149等标准验证
 
允许充装量,新设备设计,安全可靠
 
预期用途的处理要求。
 
应用
 
 
制冷空调系统
 
专为R-134a设计
 
 
中温商用和工业DX
 
制冷系统
 
 
冷水机、空调和热泵
 
好处
 
 
<1 GWP(与R-134a相比减少>99%)1);满足
 
燃气和生态设计GWP要求;零臭氧
 
损耗
 
 
性能接近R-134a的容量
 
和效率
 
 
易于转换从R-134a设计与最小
 
变化
 
 
单组分,无温度滑动
 
 
无毒和轻度易燃(ISO/ASHRAE 2)A2L)
 
 
允许在新代码下最小加注量大于1.7 kg&
 
标准(如ISO 5149或EN 378)
 
 
与POE润滑剂混溶稳定
refrigerant with global warming potential (GWP) less than
1 for replacement of R-134a in new equipment designs.
Opteon™ XL10 is a low GWP hydrofluoro-olefin (HFO) based
refrigerant with the optimal balance of properties to replace
R-134a in positive displacement, direct expansion medium
temperature commercial and industrial applications.
Opteon™ XL10 offers similar performance to the refrigerants it
is designed to replace which makes it easy and cost-effective
to apply in new equipment without major modifications.
Classified as mildly flammable (ISO/ASHRAE Class 2L),
Opteon™ XL10 allows much higher charge sizes than other
more highly flammable refrigerants and can be safely used
by following the applicable codes and standards. With a
GWP of less than 1, Opteon™ XL10 falls not only under the
150-threshold value in the Eco-design and F-Gas regulation
517/2014, but it is also excluded from the latter’s Phase
Down scenario which means that it is not consuming any
quota in terms of CO2 equivalents being placed on the market.
Since Opteon™ XL10 is a mildly flammable class 2L
refrigerant, please check your local regulations and
Standards such as PED, EN378 or ISO5149 to verify the
allowable filling charge, new equipment design and safe
handling requirements for the intended application.
Applications
Refrigeration & air-conditioning systems formerly
designed for R-134a
Medium temperature commercial and industrial DX
refrigeration systems
Water chillers, air conditioning and heat pumps

Benefits
< 1 GWP ( >99 % reduction versus R-134a) 1); meets
F-Gas and Eco-Design GWP requirements; zero ozone
depletion
Close performance match to R-134a in terms of capacity
and efficiency
Easily convertible from R-134a design with minimal
changes
Single component, no temperature glide
Non-toxic and mildly flammable (ISO/ASHRAE 2) A2L)
Allows >1.7 kg minimum filling charge under new Codes &
Standards (e.g. ISO 5149 or EN 378)
Miscible & stable with POE lubricants

浙江创弗化工有限公司 Copyright © 2021 CFREON. All rights reserved.